Skip to Content

Nitroxtec

Activated Carbon Towers 

Nitroxtec Activated carbon towers are designed to separate the oil vapor in the compressed air from the compressed air. There are flow distribution diffusers at the entrances and exits of the tower. It is designed by paying attention to the equal and homogeneous distribution of the air flow of activated carbon in the system.

Discover more

There is oil vapor in the form of condensed or steam due to oil leaking from the compressor system. Activated Carbon; It is one of the best materials used to solve air purification, water purification and oil problems all over the world.

Nitroxtec; Activated carbon towers have been developed to separate oil vapors from compressed air. To ensure perfect operation of the system, a special Oil Trap Filter produced in European standards is mounted at the tower entrance.

Special products can be produced according to your production needs.

Activated carbon towers must be used because high levels of air quality are needed in sectors that require superior technology such as Automotive, Chemistry, Plastic, Paint, Industry, medical, electronics, hospitals, food and beverage, aluminum and metal.

Activated Carbon Towers remove the oil and odor in the compressed air from the system, providing oil-free and odorless compressed air. It is designed and produced on the basis of sustainable efficiency.

We offer solutions suitable for all kinds of needs with our activated carbon towers.

Our advantages:

  • Air Filter complying with European standards has been applied.
  • It has an automatic and reliable operating system.
  • Maximum performance is provided with low power consumption.
  • It is equipped with a silencer at the discharge air outlet to reduce the noise level.
  • Electronically operated discharge valves and special filters to remove water, oil mist and dust particles are integrated into the system.

Features of Activated Carbon Towers: 

  • It removes oily odor and oil vapor from compressed air.
  • It provides an oil vapor amount of less than 0.003 ppm w/w at the outlet of the Activated Carbon tower.
  • Thanks to its special design, it prevents the bearing from moving and carbon deterioration/contamination.
  • Thanks to an optional oil gauge, it is possible to measure the flow of oil and show that the air is clean.
  • It is easy to install and install thanks to its self-supporting floor mounting.
  • It guarantees the purity of air efficiently and sustainably, thanks to high-quality German-made activated carbon.
  • Inlet air temperature range: 1.5 °C to 50 °C. High pressure model can be designed according to your needs.

Activated Carbon Towers

  • -0Pmax :200 mbar.
  • Operating pressure :

For 16 bar models max. 16bar

40 bar pressure max for models. 40 bars

  • Compressed Air Flow Rate: 20 °C (1 bar free normal air ISO1217)
  • Output Oil Concentration: 0.003 mg/m³
  • Service Life Max.. ~ 8,000 hours at 30 °C 4,000 hours at 45 °C
  • Standard accessories:
  • At the inlet: 1 micron oil filter
  • Outlet: 1 micron dust filter


Activated Carbon Tower Filter Models



You can contact us for more information about our special solutions and products  .